Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | None |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Output Shaft Code | 24 |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Displacement (in³/rev) | 5.86 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Flow Rate | 14 gal/min |
| Shaft Type | Straight |
| Special Features Assembly Code | 0 |
| Port Type | BSPP |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Series | H Series |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Port Size | 1/2, G 1/2 |
| Motor Type | Spool Valve |
| RPM [Max] | 585 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Min] | 585 rpm |
| Mounting Type Code | A |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Weight | 13.0 LB |
