Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | Straight |
| Motor Type | Spool Valve |
| RPM [Max] | 760 rpm |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 2 |
| Shaft Type | Straight |
| Displacement (in³/rev) | 4.52 |
| Special Features | None |
| Flow Rate | 14 gal/min |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Port Type | BSPP |
| Rotation | Standard Rotation |
| RPM [Min] | 760 rpm |
| Splines | 0 |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.565 in |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Port Code | E |
| Port Size | 1/2, G 1/2 |
| Output Shaft Code | 24 |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Weight | 13.0 LB |
