Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Flow Rate | 14 gal/min |
| Port Size | 1/2, G 1/2 |
| Special Features | None |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 4.52 |
| Mounting Type Code | A |
| Case Drain Code | 2 |
| RPM [Max] | 760 rpm |
| Output Shaft Code | 24 |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.565 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Series | H Series |
| Port Type | BSPP |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Port Location | Side Port |
| RPM [Min] | 760 rpm |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Weight | 13.0 LB |
