Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Shaft Size & Type | Straight |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 192 rpm |
| Mount Type | 2 Bolt |
| Special Features | None |
| Splines | 0 |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Port Type | Manifold |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Pressure [Max] | 1350 psi |
| Output Shaft Code | 24 |
| RPM [Min] | 192 rpm |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Port Code | D |
| Paint Code | A |
| Port Size | Manifold, M8 x 1.25 Threads |
| Case Drain | G 1/4 (BSP) |
| Shaft Type | Straight |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Displacement (in³/rev) | 17.94 |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.187 in |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain Code | 2 |
| Weight | 13.0 LB |
