Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 57 lpm |
| Output Shaft Code | 24 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 17.94 |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| RPM [Min] | 192 rpm |
| Port Code | D |
| Port Size | Manifold, M8 x 1.25 Threads |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight |
| Case Drain Code | 2 |
| Port Type | Manifold |
| Rotation | Standard Rotation |
| RPM [Max] | 192 rpm |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Mounting Hole Size | 0.565 in |
| Paint Code | A |
| Special Features | None |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Case Drain | G 1/4 (BSP) |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Pressure [Max] | 1350 psi |
| Shaft Size & Type | Straight |
| Weight | 13.0 LB |
