Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 24 |
| Flow Rate | 14 gal/min |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Seal Material | Buna-N |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Port Type | Manifold |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Mounting Hole Size | 0.565 in |
| Case Drain Code | 2 |
| Shaft Size & Type | Straight |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Port Code | D |
| Motor Element | Gerotor |
| RPM [Max] | 760 rpm |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Splines | 0 |
| Paint Code | A |
| Special Features | None |
| Displacement (in³/rev) | 4.52 |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Weight | 13.0 LB |
