Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Type | Manifold |
| Bolt Circle Dia. | 4.187 in |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 0.565 in |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Flow Rate | 14 gal/min |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Series | H Series |
| Case Drain Code | 2 |
| Material | Cast Iron |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | D |
| Special Features | None |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Displacement (in³/rev) | 4.52 |
| RPM [Max] | 760 rpm |
| Motor Element | Gerotor |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 760 rpm |
| Mounting Type Code | A |
| Output Shaft Code | 24 |
| Motor Type | Spool Valve |
| Shaft Type | Straight |
| Weight | 13.0 LB |
