Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Port Type | BSPP |
| Rotation | Standard Rotation |
| Pressure [Max] | 1450 psi |
| Case Drain Code | 2 |
| Port Size | 1/2 |
| Paint Code | A |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| RPM [Min] | 243 rpm |
| Mounting Hole Size | 0.565 in |
| Displacement (in³/rev) | 14.1 |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Flow Rate | 57 lpm |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.187 in |
| Special Features | None |
| Mounting Type Code | A |
| Port Code | E |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | G 1/4 (BSP) |
| Port Location | Side Port |
| Series | H Series |
| RPM [Max] | 243 rpm |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 15 gal/min |
| Weight | 13.0 LB |
