Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.565 in |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1450 psi |
| RPM [Min] | 243 rpm |
| Splines | 0 |
| Displacement (in³/rev) | 14.1 |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Special Features | None |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Paint Code | A |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.187 in |
| Special Features Assembly Code | 0 |
| Port Size | 1/2 |
| Pilot Diameter | 3.25 in |
| Port Type | BSPP |
| Special Features Hardware Code | 00 |
| Port Code | E |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Case Drain Code | 2 |
| Case Drain | G 1/4 (BSP) |
| RPM [Max] | 243 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
