Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| RPM [Min] | 304 rpm |
| RPM [Max] | 304 rpm |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Paint Code | A |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Assembly Code | 0 |
| Case Drain | G 1/4 (BSP) |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features | None |
| Series | H Series |
| Splines | 0 |
| Flow Rate | 57 lpm |
| Port Size | 1/2 |
| Case Drain Code | 2 |
| Port Code | E |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 11.29 |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Pressure [Max] | 1600 psi |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Port Type | BSPP |
| Weight | 13.0 LB |
