Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Hardware Code | 00 |
| Splines | 0 |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| RPM [Max] | 304 rpm |
| RPM [Min] | 304 rpm |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Pressure [Max] | 1600 psi |
| Series | H Series |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | None |
| Paint Code | A |
| Port Type | BSPP |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Case Drain | G 1/4 (BSP) |
| Flow Rate | 57 lpm |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Mounting Hole Size | 0.565 in |
| Special Features Assembly Code | 0 |
| Port Size | 1/2 |
| Bolt Circle Dia. | 4.187 in |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 11.29 |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Case Drain Code | 2 |
| Port Code | E |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
