Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Flow Rate | 14 gal/min |
| Paint Code | A |
| RPM [Max] | 353 rpm |
| Pilot Diameter | 3.25 in |
| Port Type | BSPP |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Output Shaft Code | 01 |
| Pressure [Max] | 1650 psi |
| Displacement (in³/rev) | 9.7 |
| Mounting Type Code | A |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| RPM [Min] | 353 rpm |
| Port Size | 1/2, G 1/2 |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | None |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Material | Cast Iron |
| Port Code | E |
| Weight | 13.0 LB |
