Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 14 gal/min |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Port Size | 1/2, G 1/2 |
| Paint Code | A |
| RPM [Max] | 353 rpm |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Flange Orientation | Standard |
| Case Drain Code | 2 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Corrosion Resistant | No |
| Series | H Series |
| Motor Element | Gerotor |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Code | E |
| Port Type | BSPP |
| Port Location | Side Port |
| Displacement (in³/rev) | 9.7 |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1650 psi |
| Seal Material | Buna-N |
| Splines | 0 |
| Mount Type | 2 Bolt |
| RPM [Min] | 353 rpm |
| Weight | 13.0 LB |
