Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| RPM [Max] | 585 rpm |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Flow Rate | 57 lpm |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 585 rpm |
| Port Type | BSPP |
| Special Features | None |
| Case Drain Code | 2 |
| Case Drain | G 1/4 (BSP) |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Displacement (in³/rev) | 5.86 |
| Port Code | E |
| Splines | 0 |
| Output Shaft Code | 01 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Bolt Circle Dia. | 4.187 in |
| Series | H Series |
| Paint Code | A |
| Port Size | 1/2 |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
