Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.187 in |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 585 rpm |
| Port Size | 1/2 |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Rotation | Standard Rotation |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 585 rpm |
| Displacement (in³/rev) | 5.86 |
| Mounting Type Code | A |
| Paint Code | A |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Case Drain | G 1/4 (BSP) |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | BSPP |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Special Features | None |
| Material | Cast Iron |
| Port Location | Side Port |
| Mounting Hole Size | 0.565 in |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Series | H Series |
| Case Drain Code | 2 |
| Splines | 0 |
| Seal Material | Buna-N |
| Port Code | E |
| Weight | 13.0 LB |
