Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Size | 1/2 |
| Port Code | E |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | BSPP |
| Motor Type | Spool Valve |
| Splines | 0 |
| Mounting Hole Size | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Series | H Series |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 2.8 |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Case Drain Code | 2 |
| Case Drain | G 1/4 (BSP) |
| Special Features Assembly Code | 0 |
| Flow Rate | 12 gal/min |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 969 rpm |
| RPM [Min] | 969 rpm |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Paint Code | A |
| Flow [Max] | 12 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
