Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Case Drain | G 1/4 (BSP) |
| Flow [Max] | 12 gal/min |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Port Code | E |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 2.8 |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Mounting Type Code | A |
| Port Size | 1/2 |
| Port Type | BSPP |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Flow Rate | 12 gal/min |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| RPM [Max] | 969 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Series | H Series |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Material | Cast Iron |
| Paint Code | A |
| Seal Material | Buna-N |
| Output Shaft Code | 01 |
| RPM [Min] | 969 rpm |
| Special Features Hardware Code | 00 |
| Weight | 13.0 LB |
