Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2, 1/2-14 |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| RPM [Max] | 152 rpm |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Series | H Series |
| Special Features Hardware Code | AB |
| Mounting Type Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Code | B |
| Displacement (in³/rev) | 22.58 |
| Flow Rate | 14 gal/min |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Case Drain Code | 0 |
| Special Features | Low Speed Valve |
| Motor Type | Spool Valve |
| Case Drain | None |
| Pressure [Max] | 1250 psi |
| RPM [Min] | 152 rpm |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Min] | 600 psi |
| Material | Cast Iron |
| Mounting Hole Size | 0.565 in |
| Duty | Standard-Duty |
| Weight | 15.2 LB |
