Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Hardware Code | AB |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| RPM [Max] | 152 rpm |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | Low Speed Valve |
| Port Location | Side Port |
| RPM [Min] | 152 rpm |
| Port Size | 1/2, 1/2-14 |
| Flow [Max] | 15 gal/min |
| Port Type | NPTF |
| Splines | 0 |
| Pressure [Min] | 600 psi |
| Mounting Type Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Flange Orientation | Standard |
| Output Shaft Code | 01 |
| Mounting Hole Size | 0.565 in |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 22.58 |
| Pressure [Max] | 1250 psi |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Series | H Series |
| Port Code | B |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Mount Type | 2 Bolt |
| Flow Rate | 14 gal/min |
| Pilot Diameter | 3.25 in |
| Weight | 15.2 LB |
