Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | Low Speed Valve |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Port Code | A |
| Displacement (in³/rev) | 17.94 |
| RPM [Max] | 192 rpm |
| Series | H Series |
| Flow Rate | 14 gal/min |
| Mount Type | 2 Bolt |
| Port Type | SAE O-Ring |
| Mounting Holes | 0.535 in |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Port Location | Side Port |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AB |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1350 psi |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Mounting Hole Size | 0.565 in |
| Pressure [Min] | 600 psi |
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Output Shaft Code | 01 |
| Splines | 0 |
| RPM [Min] | 192 rpm |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 0 |
| Weight | 13.0 LB |
