Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 192 rpm |
| Port Code | A |
| Mounting Type Code | A |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Mounting Hole Size | 0.565 in |
| Pressure [Max] | 1350 psi |
| Material | Cast Iron |
| Special Features | Low Speed Valve |
| Seal Material | Buna-N |
| Flow Rate | 14 gal/min |
| Displacement (in³/rev) | 17.94 |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | SAE O-Ring |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pressure [Min] | 600 psi |
| Port Size & Location | SAE-10 Side |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Special Features Hardware Code | AB |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Series | H Series |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 192 rpm |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Bolt Circle Dia. | 4.187 in |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Paint Code | A |
| Weight | 13.0 LB |
