Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Paint Code | A |
| Shaft Size | 1 |
| Flange Orientation | Standard |
| Case Drain | None |
| Mount Type | 4 Bolt |
| Port Type | SAE O-Ring |
| Mounting Hole Size | 3/8 in |
| Special Features Hardware Code | 00 |
| Flow Rate | 15 gal/min |
| Mounting Holes | 3/8-16 |
| Pressure [Max] | 1600 psi |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Port Code | G |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Pilot Diameter | 1.75 in |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Mounting Type Code | B |
| Output Shaft Code | 18 |
| Viscocity (SUS) [Max] | 100 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Assembly Code | 0 |
| RPM [Max] | 304 rpm |
| Splines | 0 |
| Shaft Type | Tapered w/ Woodruff Key |
| Displacement (in³/rev) | 11.3 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Series | H Series |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Shaft Size & Type | Tapered |
| Port Location | End Port |
| Flow [Max] | 15 gal/min |
| Port Size | SAE-8, 7/8-14 UNF |
| Weight | 13.0 LB |
