Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Series | H Series |
| Special Features | None |
| Shaft Size | 1 |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 11.3 |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 18 |
| Paint Code | A |
| Splines | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Port Size | SAE-8, 7/8-14 UNF |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Port Location | End Port |
| Case Drain | None |
| Shaft Type | Tapered w/ Woodruff Key |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Viscocity (SUS) [Max] | 100 |
| Mounting Hole Size | 3/8 in |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Tapered |
| Motor Element | Gerotor |
| RPM [Max] | 304 rpm |
| Flow Rate | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Pressure [Max] | 1600 psi |
| Port Code | G |
| Mount Type | 4 Bolt |
| Weight | 13.0 LB |
