Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Series | H Series |
| Mounting Holes | 3/8-16 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain | None |
| RPM [Min] | 243 rpm |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Code | A |
| (Catalog) Shaft Type | 1 in x 1/4 in Straight |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1450 psi |
| Displacement (in³/rev) | 14.1 |
| Port Type | SAE O-Ring |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Flow Rate | 14 gal/min |
| Output Shaft Code | 01 |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Material | Cast Iron |
| Mounting Type Code | B |
| Port Location | Side Port |
| Shaft Size | 1 |
| Port Size & Location | SAE-10 Side |
| Geroter/Geroler Options | Free Running |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Hole Size | 3/8 in |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| RPM [Max] | 243 rpm |
| Case Drain Code | 0 |
| Viscocity (SUS) [Max] | 100 |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Special Features | Free Running Gerotor |
| Special Features Hardware Code | AA |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
