Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 4 Bolt |
| Pressure [Max] | 1450 psi |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Geroter/Geroler Options | Free Running |
| Seal Material | Buna-N |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pilot Diameter | 1.75 in |
| Mounting Hole Size | 3/8 in |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Port Code | A |
| Special Features Hardware Code | AA |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 14.1 |
| Output Shaft Code | 01 |
| (Catalog) Shaft Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Viscocity (SUS) [Max] | 100 |
| Paint Code | A |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size & Location | SAE-10 Side |
| Shaft Size | 1 |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Case Drain | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | SAE O-Ring |
| Flow Rate | 14 gal/min |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Material | Cast Iron |
| RPM [Min] | 243 rpm |
| Series | H Series |
| RPM [Max] | 243 rpm |
| Port Location | Side Port |
| Special Features | Free Running Gerotor |
| Splines | 0 |
| Weight | 13.0 LB |
