Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint Code | A |
| Bolt Circle Dia. | 4.187 in |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Case Drain Code | 1 |
| Material | Cast Iron |
| Port Code | A |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.565 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mount Type | 2 Bolt |
| RPM [Max] | 969 rpm |
| Mounting Type Code | A |
| Port Type | SAE O-Ring |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Port Location | Side Port |
| Rotation | Reverse Rotation |
| Displacement (in³/rev) | 2.81 |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 1 |
| Flow [Max] | 12 gal/min |
| Corrosion Resistant | No |
| Series | H Series |
| Special Features | None |
| Flow Rate | 11.25 gal/min |
| Weight | 13.0 LB |
