Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Port Size & Location | SAE-10 Side |
| Port Type | SAE O-Ring |
| Bolt Circle Dia. | 4.187 in |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Woodruff Key |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Series | H Series |
| RPM [Max] | 969 rpm |
| Port Code | A |
| Pilot Diameter | 3.25 in |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 2.81 |
| Flow Rate | 11.25 gal/min |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint Code | A |
| Special Features | None |
| Special Features Assembly Code | 1 |
| Rotation | Reverse Rotation |
| Flow [Max] | 12 gal/min |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 1 |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
