Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 01 |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| RPM [Max] | 152 rpm |
| Series | H Series |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Port Type | NPTF |
| Special Features Hardware Code | AA |
| Displacement (in³/rev) | 22.6 |
| Mounting Holes | 0.535 in |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Splines | 0 |
| Flow Rate | 15 gal/min |
| Port Code | B |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Geroter/Geroler Options | Free Running |
| Rotation | Reverse Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Special Features | Free Running Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1250 psi |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Material | Cast Iron |
| Special Features Assembly Code | 1 |
| RPM [Min] | 152 rpm |
| Weight | 13.0 LB |
