Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.535 in |
| Paint Code | A |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 22.6 |
| Special Features Assembly Code | 1 |
| Pilot Diameter | 3.25 in |
| Geroter/Geroler Options | Free Running |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1250 psi |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Special Features | Free Running Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | AA |
| Case Drain | None |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Output Shaft Code | 01 |
| RPM [Min] | 152 rpm |
| Rotation | Reverse Rotation |
| Port Code | B |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 152 rpm |
| Port Type | NPTF |
| Port Size | 1/2, 1/2-14 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Series | H Series |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Motor Element | Gerotor |
| Port Size & Location | 1/2 in NPTF Side |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
