Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Displacement (in³/rev) | 5.9 |
| Special Features Assembly Code | 0 |
| RPM [Max] | 585 rpm |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Rotation | Standard Rotation |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | Straight |
| Mount Type | 4 Bolt |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Splines | 0 |
| Motor Type | Spool Valve |
| Port Type | NPTF |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Port Location | Side Port |
| RPM [Min] | 585 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Hole Size | 3/8 in |
| Motor Element | Gerotor |
| Port Size & Location | 1/2 in NPTF Side |
| Port Code | B |
| Case Drain | None |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Mounting Type Code | B |
| Shaft Type | Straight w/ Cross Hole |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Output Shaft Code | 07 |
| Weight | 11.8 LB |
