Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Series | H Series |
| Shaft Size & Type | Straight |
| Mounting Type Code | B |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Splines | 0 |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Displacement (in³/rev) | 5.9 |
| Shaft Type | Straight w/ Cross Hole |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| Output Shaft Code | 07 |
| Mounting Holes | 3/8-16 |
| RPM [Max] | 585 rpm |
| Rotation | Standard Rotation |
| Paint Code | A |
| Port Location | Side Port |
| Case Drain | None |
| RPM [Min] | 585 rpm |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Port Code | B |
| Port Size | 1/2, 1/2-14 |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Weight | 11.8 LB |
