Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Max] | 585 rpm |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 5.9 |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Shaft Type | Straight w/ Cross Hole |
| Port Code | A |
| Shaft Size & Type | Straight |
| RPM [Min] | 585 rpm |
| Mounting Type Code | A |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF |
| Case Drain | None |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Splines | 0 |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| Output Shaft Code | 08 |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Mount Type | 2 Bolt |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Corrosion Resistant | No |
| Paint Code | A |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Weight | 11.8 LB |
