Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Port Size & Location | SAE-10 Side |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Displacement (in³/rev) | 5.9 |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Shaft Type | Straight w/ Cross Hole |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Port Size | SAE-10, 7/8-14 UNF |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Port Code | A |
| Mounting Hole Size | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 08 |
| Port Type | SAE O-Ring |
| Mounting Type Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Shaft Size & Type | Straight |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| RPM [Min] | 585 rpm |
| Special Features Hardware Code | 00 |
| RPM [Max] | 585 rpm |
| Weight | 11.8 LB |
