Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Type | Straight w/ Cross Hole |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.535 in |
| Shaft Size & Type | Straight |
| Bolt Circle Dia. | 4.19 in |
| Rotation | Standard Rotation |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Corrosion Resistant | No |
| Mounting Type Code | A |
| Paint Code | A |
| Port Type | SAE O-Ring |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Port Code | A |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Displacement (in³/rev) | 4.5 |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 08 |
| Port Size | SAE-10, 7/8-14 UNF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Series | H Series |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| RPM [Max] | 760 rpm |
| RPM [Min] | 760 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Weight | 11.5 LB |
