Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Displacement (in³/rev) | 4.5 |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Shaft Size & Type | Straight |
| Port Size & Location | SAE-10 Side |
| Mounting Hole Size | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Motor Element | Gerotor |
| RPM [Max] | 760 rpm |
| Corrosion Resistant | No |
| Case Drain | None |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Cross Hole |
| Flange Orientation | Standard |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Size | SAE-10, 7/8-14 UNF |
| RPM [Min] | 760 rpm |
| Bolt Circle Dia. | 4.19 in |
| Port Location | Side Port |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Port Code | A |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 08 |
| Weight | 11.5 LB |
