Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Case Drain | None |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Port Size | 1/2, 1/2-14 |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Min] | 969 rpm |
| Mounting Type Code | B |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Duty | Standard-Duty |
| Port Code | B |
| Shaft Size & Type | Straight |
| Flow [Max] | 12 gal/min |
| RPM [Max] | 969 rpm |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Cross Hole |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | NPTF |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Paint Code | A |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 3 1/4 in |
| Splines | 0 |
| Flow Rate | 12 gal/min |
| Mounting Hole Size | 3/8 in |
| Output Shaft Code | 08 |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Displacement (in³/rev) | 2.8 |
| Weight | 11.2 LB |
