Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Port Size | 1/2, 1/2-14 |
| Shaft Type | Straight w/ Cross Hole |
| Case Drain | None |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| RPM [Max] | 969 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Port Code | B |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Flow [Max] | 12 gal/min |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 08 |
| Case Drain Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 969 rpm |
| Displacement (in³/rev) | 2.8 |
| Shaft Size & Type | Straight |
| Series | H Series |
| Flow Rate | 12 gal/min |
| Mounting Type Code | B |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8 in |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 11.2 LB |
