Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | Straight |
| Duty | Standard-Duty |
| Mounting Type Code | B |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 4.5 |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| Output Shaft Code | 08 |
| RPM [Max] | 760 rpm |
| Port Code | B |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Paint Code | A |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Cross Hole |
| Pressure [Max] | 1800 psi |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Type | NPTF |
| Port Size & Location | 1/2 in NPTF Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Port Size | 1/2, 1/2-14 |
| Special Features | None |
| RPM [Min] | 760 rpm |
| Splines | 0 |
| Flange Orientation | Standard |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Element | Gerotor |
| Weight | 11.5 LB |
