Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Pilot Diameter | 1.75 in |
| Mounting Hole Size | 3/8 in |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Type | Straight w/ Cross Hole |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Mounting Type Code | B |
| Special Features Hardware Code | 00 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Displacement (in³/rev) | 4.5 |
| Flow Rate | 15 gal/min |
| Special Features | None |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Paint Code | A |
| Series | H Series |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Port Size | 1/2, 1/2-14 |
| RPM [Max] | 760 rpm |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Size & Type | Straight |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Location | Side Port |
| Splines | 0 |
| Case Drain | None |
| RPM [Min] | 760 rpm |
| Output Shaft Code | 08 |
| Special Features Assembly Code | 0 |
| Weight | 11.5 LB |
