
- Spool Motor
- Gerotor
- Spool Valve
- SAE-10 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Motor Type | Spool Valve |
Displacement (in³/rev) | 4.5 |
Pilot Diameter | 3.25 in |
Series | H Series |
Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
Paint/Packaging | Low Gloss Black, Individual Box |
Case Drain | None |
Bolt Circle Dia. | 4.19 in |
Port Size & Location | SAE-10 Side |
Shaft Size & Type | 1 in x 1/4 in Straight |
Splines | 0 |
Flow [Max] | 15 gal/min |
Corrosion Resistant | No |
Inlet Pressure [Max] | 2500 psi |
RPM [Min] | 760 rpm |
Port Location | Side Port |
Mounting Hole Size | 0.535 in |
Special Features Hardware Code | AA |
Flow Rate | 15 gal/min |
Special Features Assembly Code | 0 |
Port Size | SAE-10 |
Shaft Type | Straight w/ Woodruff Key |
Seal Material | Buna-N |
Mounting Holes | 0.535 in |
Port Code | A |
RPM [Max] | 760 rpm |
Duty | Standard-Duty |
Material | Cast Iron |
Paint Code | A |
Port Type | SAE O-Ring |
Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
Mounting Type Code | A |
Case Drain Code | 0 |
Pressure [Max] | 1800 psi |
Special Features | Free Running Gerotor |
Mount Type | 2 Bolt |
Flange Orientation | Standard |
Rotation | Standard Rotation |
Output Shaft Code | 01 |
Motor Element | Gerotor |
Weight | 13.0 LB |
