Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- SAE-10 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 01 |
| Port Size | SAE-10 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Pressure [Max] | 1800 psi |
| Special Features Hardware Code | AA |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| RPM [Min] | 760 rpm |
| Port Size & Location | SAE-10 Side |
| Port Code | A |
| Special Features | Free Running Gerotor |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Series | H Series |
| Port Type | SAE O-Ring |
| Shaft Type | Straight w/ Woodruff Key |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 4.5 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| RPM [Max] | 760 rpm |
| Weight | 13.0 LB |
