Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Geroter/Geroler Options | Free Running |
| Special Features Hardware Code | AA |
| Pressure [Max] | 1250 psi |
| Bolt Circle Dia. | 4.19 in |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 152 rpm |
| Case Drain Code | 0 |
| Case Drain | None |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Port Size | 1/2, 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 22.6 |
| Port Location | Side Port |
| Paint Code | A |
| Port Code | B |
| Mounting Hole Size | 0.535 in |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Special Features | Free Running Gerotor |
| Mount Type | 2 Bolt |
| RPM [Max] | 152 rpm |
| Rotation | Standard Rotation |
| Output Shaft Code | 01 |
| Port Size & Location | 1/2 in NPTF Side |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Material | Cast Iron |
| Mounting Type Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
