Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Mounting Type Code | A |
| Flange Orientation | Standard |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Case Drain | None |
| Displacement (in³/rev) | 22.6 |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Splines | 0 |
| Special Features Hardware Code | AA |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Series | H Series |
| Port Size & Location | 1/2 in NPTF Side |
| Paint Code | A |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| RPM [Max] | 152 rpm |
| Case Drain Code | 0 |
| RPM [Min] | 152 rpm |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Port Size | 1/2, 1/2-14 |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Geroter/Geroler Options | Free Running |
| Pressure [Max] | 1250 psi |
| Special Features | Free Running Gerotor |
| Port Code | B |
| Weight | 13.0 LB |
