Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1350 psi |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Corrosion Resistant | No |
| Geroter/Geroler Options | Free Running |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| RPM [Min] | 192 rpm |
| RPM [Max] | 192 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Port Code | B |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Special Features | Free Running Gerotor |
| Mounting Holes | 0.535 in |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Case Drain | None |
| Motor Element | Gerotor |
| Special Features Hardware Code | AA |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 17.9 |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Port Type | NPTF |
| Weight | 13.0 LB |
