Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| RPM [Min] | 192 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Displacement (in³/rev) | 17.9 |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Special Features Hardware Code | AA |
| Port Size | 1/2, 1/2-14 |
| Special Features | Free Running Gerotor |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Flow [Max] | 15 gal/min |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Port Location | Side Port |
| Port Type | NPTF |
| Flow Rate | 15 gal/min |
| Port Code | B |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1350 psi |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 192 rpm |
| Case Drain | None |
| Paint Code | A |
| Geroter/Geroler Options | Free Running |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Weight | 13.0 LB |
