Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Code | B |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Port Type | NPTF |
| Port Size & Location | 1/2 in NPTF Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Mount Type | 2 Bolt |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Pressure [Max] | 1450 psi |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | Free Running Gerotor |
| Mounting Hole Size | 0.535 in |
| Displacement (in³/rev) | 14.1 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Splines | 0 |
| RPM [Max] | 243 rpm |
| Flange Orientation | Standard |
| Port Size | 1/2 |
| Motor Type | Spool Valve |
| Case Drain | None |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 01 |
| RPM [Min] | 243 rpm |
| Special Features Hardware Code | AA |
| Flow Rate | 15 gal/min |
| Weight | 13.0 LB |
