Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 14.1 |
| Flange Orientation | Standard |
| Port Code | B |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | 1/2 |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Series | H Series |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Type | NPTF |
| Flow Rate | 15 gal/min |
| RPM [Min] | 243 rpm |
| Bolt Circle Dia. | 4.19 in |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1450 psi |
| Special Features | Free Running Gerotor |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Port Location | Side Port |
| Case Drain | None |
| Splines | 0 |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.535 in |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Special Features Hardware Code | AA |
| Paint Code | A |
| RPM [Max] | 243 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
