Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint Code | A |
| Special Features Hardware Code | AA |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Geroter/Geroler Options | Free Running |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Bolt Circle Dia. | 4.19 in |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Max] | 353 rpm |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1650 psi |
| Port Type | NPTF |
| Case Drain | None |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Port Size | 1/2, 1/2-14 |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.535 in |
| Displacement (in³/rev) | 9.7 |
| Case Drain Code | 0 |
| Series | H Series |
| Port Code | B |
| Special Features | Free Running Gerotor |
| Mounting Type Code | A |
| Weight | 13.0 LB |
