Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Case Drain | None |
| Pressure [Max] | 1650 psi |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | 1/2, 1/2-14 |
| Flow Rate | 15 gal/min |
| Flow [Max] | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Special Features | Free Running Gerotor |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Pilot Diameter | 3.25 in |
| Port Type | NPTF |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 9.7 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Special Features Hardware Code | AA |
| Paint Code | A |
| Mounting Type Code | A |
| RPM [Max] | 353 rpm |
| Mounting Hole Size | 0.535 in |
| Duty | Standard-Duty |
| Geroter/Geroler Options | Free Running |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Port Code | B |
| Weight | 13.0 LB |
