Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 5.9 |
| Port Size | 1/2, 1/2-14 |
| RPM [Min] | 585 rpm |
| Case Drain | None |
| Geroter/Geroler Options | Free Running |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Mounting Hole Size | 0.535 in |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Splines | 0 |
| Series | H Series |
| Output Shaft Code | 01 |
| Paint Code | A |
| Seal Material | Buna-N |
| Flow Rate | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | Free Running Gerotor |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 585 rpm |
| Port Code | B |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
